Exterior Roofing Transformation Project

Exterior Roofing Transformation — Memorial Area, Houston

This 1990s Memorial Area home had three interconnected exterior problems that previous contractors had tried to solve separately. The roof was leaking at the eaves, the soffits were visibly rotting, and undersized 4-inch gutters were allowing water to pool against the foundation. Rather than call three different contractors, the homeowner chose Tell Project for a single, coordinated exterior transformation.

Project Details

  • Location: Memorial Area, Houston TX 77024
  • Roof Size: 3,200 sq ft
  • Material: Owens Corning Duration STORM Shingles
  • Additional: 6" seamless gutters + vinyl soffits
  • Duration: 5 days
  • Warranty: Owens Corning Platinum Preferred

Scope of Work

  • Complete tear-off of aging 3-tab shingles with storm-rated replacement
  • Replacement of all rotted soffit and fascia boards around the full perimeter
  • Upgrade from 4" K-style to 6" seamless aluminum gutters
  • Installation of leaf guard protection on all gutter runs
  • New continuous soffit venting for balanced attic ventilation
  • Fascia board replacement with pre-finished aluminum capping
  • Foundation drainage correction through proper gutter downspout routing
  • Full perimeter inspection and cleanup with magnetic nail sweep

The Challenge

The homeowner's problems were interconnected — and that's exactly why previous piecemeal repairs hadn't worked. The original roof's eave-line shingles had lifted from years of wind exposure, allowing rain to penetrate behind the fascia boards. That moisture caused the wood soffits to rot, which in turn blocked the soffit vents and created attic condensation issues. Meanwhile, the original 4-inch K-style gutters were chronically overwhelmed during Houston downpours, sending water cascading down the fascia (accelerating rot) and pooling against the foundation. Three problems, one root cause: a failing exterior envelope that needed to be addressed as a system, not in pieces.

Our Approach

We designed a phased 5-day integrated project that tackled the roof first, then worked downward. Day 1-2: complete roof tear-off and replacement with Owens Corning Duration STORM shingles — selected for their SureNail technology that provides 130 mph wind resistance in the nailing zone. Day 3: all rotted soffit and fascia boards removed and replaced with moisture-resistant vinyl soffits and pre-finished aluminum fascia capping. Day 4: 6-inch seamless aluminum gutters custom-formed on-site and installed with proper slope, plus leaf guard screens on all runs. Day 5: downspout routing corrections to direct water away from the foundation, final details, and cleanup.

Results

The integrated approach saved the homeowner approximately $3,000 compared to hiring three separate contractors — and more importantly, it ensured every component worked together as a system. The new continuous soffit vents provide balanced attic ventilation for the first time in the home's history. The 6-inch gutters handle Houston's heaviest downpours without overflow. And the foundation water pooling issue was eliminated entirely through proper downspout routing with splash blocks. The Owens Corning Platinum Preferred warranty covers both materials and workmanship — a level of protection only available through certified preferred contractors.

Detailed Scope of Work

Tear-Off & Deck Repair

Complete removal of the existing 3-tab shingle system across all 3,200 square feet. Our crew discovered significant moisture damage at 8 eave-line sections where water had penetrated behind the fascia — approximately 320 square feet of OSB decking was replaced. New synthetic underlayment installed with ice and water shield at all eaves, valleys, and penetrations before Owens Corning Duration STORM shingles were laid with 6-nail pattern for maximum wind uplift resistance.

Soffit & Fascia Replacement

All original wood soffits were removed, revealing blocked ventilation channels and extensive moisture damage across 60% of the home's perimeter. Replacement used perforated vinyl soffit panels that provide continuous airflow into the attic — resolving the condensation problem that had plagued the home for years. Fascia boards were replaced with composite lumber and capped with pre-finished aluminum for zero-maintenance weather protection.

Gutter System Installation

The undersized 4-inch K-style gutters were removed and replaced with 6-inch seamless aluminum gutters, custom-formed on-site for perfect fit with no joints to leak. All runs were pitched at the correct 1/4-inch per 10 feet for optimal flow. Leaf guard screens installed on every run to prevent debris clogs. Downspouts were repositioned and extended with splash blocks to direct water at least 4 feet from the foundation — eliminating the pooling problem entirely.

Project Timeline & Warranty

This exterior transformation was completed in five working days — Day 1-2 for roof tear-off and shingle installation, Day 3 for soffit and fascia replacement around the full perimeter, Day 4 for gutter system installation and custom forming, and Day 5 for downspout routing corrections, detail work, and final cleanup. The homeowner saved approximately $3,000 compared to contracting each trade separately, and gained the peace of mind that every component was designed to work together. The project carries an Owens Corning Platinum Preferred warranty — one of the strongest in the industry — covering both materials and workmanship through a single point of contact.

"I'd been dealing with three separate problems for years — leaking roof, rotting soffits, overflowing gutters. Previous contractors only fixed their piece and left. Tell Project saw the whole picture, fixed everything in under a week, and saved me money doing it all at once. Should have called them first."

Patricia W. — Memorial, Houston TX | Exterior Roofing Transformation

Key Takeaways

Integrated Approach Wins

When roof, soffit, and gutter problems are interconnected, fixing them separately wastes time and money. A single contractor handling the full exterior envelope ensures every component works as a system — and saves approximately 15-20% compared to separate trades.

Storm-Ready Systems

Owens Corning Duration STORM shingles with SureNail technology provide 130 mph wind resistance — critical protection for Houston's hurricane season. Paired with 6-inch seamless gutters, the home is now equipped to handle the worst Texas weather throws at it.

Leaf Guard Investment

Adding leaf guard screens at installation eliminates the #1 cause of gutter failure — debris clogs. The small upfront investment prevents water overflow damage to fascia, soffits, and foundation for years to come.

Related Projects & Services

Complete Roof Replacement Full tear-off and replacement in Bellaire Commercial Roof Coating Silicone coating on warehouse district flat roof Soffit & Fascia Services Learn about our soffit and fascia repair process

Planning an Exterior Roofing Project?

Get a free inspection covering your roof, soffits, fascia, and gutters — all in one visit.

Call (832) 591-7991 Get Free Estimate

Roofing Resources & Guides

Roofing Materials Guide
Storm Season Preparation
Gutter & Downspout Guide
Soffit & Fascia Guide
Call (832) 591-7991 Text us Get free estimate